Product Description

Jumper Yellow diamond tools for marble

Klindex Yellow diamond tools for marble are especially designed for marble polishing.  Jumper Yellow discs are resin bonded diamond tools available in grits 60, 120, 220, 400, 800, 1500.  The tool size is 75mm/3″. You need the Kit Spring Holder System with the Jumper Yellow which are velcro backed, The Spring Holder System takes 9 Jumper Yellow discs 

The Jumper Yellow series is not suitable for abrasive marble or travertine. It is best practice to test the marble for hardness and abrasiveness before starting to grind. And to check the wear of the discs after 5 to 10 minutes grinding. By doing this one avoids loss of tools due to incorrect matching with the marble to be treated.

Jumper Yellow diamond tools for marble

Good polishing practise requires the removal, by each follow on step, of all scratch patterns made by the previous step. This ensures a scratch free floor appearance after the polishing steps have been completed. Klindex Jumper Yellow diamond discs for marble give you the edge in realising high quality polished marble surfaces, making you and your customer happy all the way.

Jumper Yellow diamond tools for marble polishing procedure:

Standard Process:

1) Start by grinding with MS1 and keep on working until the floor is perfectly levelled.

2) Proceed with MS2 to eliminate the scratch marks created with the MS1. Don’t forget to use the AKTIVATOR1 before and during this grinding cut.

3) Proceed with CK3. As an alternative for abrasive marbles, use PAVELUX M3 instead.

4) Next, use MK4

5) Next, MK5 will follow. Usually this step represents the final step before using polishing powder. However, difficult-to-polish marbles such as black, green, etc. will require further steps with MK6 and MK7 before polishing.

6) Finish the job by polishing with the most appropriate polishing powder.

7) Wash with STONE SOAP to protect and improve the gloss.